Arrow Up Icon

Stationary Scientific/Industrial Systems

Fixed Radiometric Automation • 100/1000M GigE Streaming • Science-Grade Precision

Stationary Radiometric Infrared Imaging Systems

Engineered for permanent factory integration, continuous electrical switchgear monitoring, non-destructive testing (NDT), and laboratory R&D. The stationary FIR Series provides calibrated total-radiation data streaming over Gigabit Ethernet, uncooled focal plane array sensitivity down to ≤ 0.04°C, and high-speed multi-zone automated temperature analysis up to +2000°C.

High-Definition IR Array
1024 × 768
Up to 786,432 calibrated radiometric pixels for resolving sub-millimeter anomalies.
Thermal Sensitivity (NETD)
≤ 0.04°C
Sensitivity rating down to 40 mK for subtle thermal gradient discrimination.
Data Transmission Mode
1000M GigE
Uncompressed raw radiometric streaming via industrial RJ45 network interfaces.
Calibrated Dynamic Range
-40°C to +2000°C
Multi-range switching from cryogenic cold chain to high-temperature metallurgy.
Industrial Instrumentation

Stationary Science-Grade FIR Series

Unlike portable or drone-mounted cameras constrained by battery runtimes and compressed wireless links, the stationary FIR Series is architected for 24/7 continuous operation. Housed in ruggedized chassis with standard UNC 1/4"-20 mounting, 12V DC power, and total radiation temperature streaming over RJ45 Ethernet, these cameras integrate directly into SCADA, PLC automation networks, and scientific analysis workstations.

Continuous Process • Condition Monitoring
FIR 384 384 × 288

Industrial workhorse for inline production monitoring, conveyor thermal inspection, and automated switchgear enclosure protection.

  • IR Resolution: 384 × 288 (110,592 px)
  • Sensitivity (NETD): ≤ 0.06°C (60 mK) @ 30°C
  • Standard Optics: 28° (IFOV: 1.30 mrad)
  • Optional Lenses: 6°, 12°, 48°, Macro 1.25×, 3×
  • Standard Temp Range: -40°C to +410°C
  • High Temp Option: +300°C to +2000°C
  • Power Consumption: ≤ 5W (DC 12V)
  • Full radiation temperature stream output via RJ45
  • Manual, motorized electric, and automatic focus modes
  • Compact 226.8 × 91 × 86.5 mm footprint (≤ 1.0 kg)
  • Optional RS-485, alarm relays & sync trigger interfaces
Research • High-Voltage Substation
FIR 640 640 × 480

High-resolution thermal benchmark combining ultra-low 40 mK thermal noise with high spatial acuity for critical utility and petrochemical diagnostics.

  • IR Resolution: 640 × 480 (307,200 px)
  • Sensitivity (NETD): ≤ 0.04°C (40 mK) @ 30°C
  • Standard Optics: 24° (IFOV: 0.66 mrad)
  • Optional Lenses: 6°, 12°, 48°, Macro 1.25×, 3×
  • Standard Temp Range: -40°C to +410°C
  • High Temp Option: +300°C to +2000°C
  • Power Consumption: ≤ 7W (DC 12V)
  • Sub-40 mK sensitivity detects minute thermal deltas
  • 0.66 mrad spatial resolution for distant switchgear
  • Gigabit Ethernet streaming with PC network analysis suite
  • Supports multi-region real-time temperature alarms
Ultra-HD Science • Microelectronics
FIR 1024 1024 × 768

Flagship scientific thermal imager delivering 786k radiometric data points for semiconductor failure analysis, aerospace materials, and advanced thermophysics.

  • IR Resolution: 1024 × 768 (786,432 px)
  • Sensitivity (NETD): ≤ 0.05°C (50 mK) @ 30°C
  • Standard Optics: 28° (IFOV: 0.48 mrad)
  • Optional Lenses: 7°, 14°, 50°, Macro 1.25×, 3×
  • Standard Temp Range: -40°C to +410°C
  • High Temp Option: +300°C to +2000°C
  • Power Consumption: ≤ 8W (DC 12V)
  • Down to 0.12 mrad spatial resolution with 7° telephoto
  • 30mm–200mm working distance for macro microelectronics
  • Total radiometric temperature flow over Gigabit Ethernet
  • Integrated synchronous hardware triggers & relay switches

Comprehensive Stationary Engineering Specifications

Verified technical parameters extracted from official technical datasheets. All systems utilize uncooled focal plane arrays with longwave 8–14 μm spectral response.

Parameter / Specification FIR 384 FIR 640 FIR 1024
Detector Type Uncooled FPA Uncooled FPA Uncooled FPA
Detector Material Amorphous Silicon / VOx Amorphous Silicon / VOx Amorphous Silicon / VOx
Spectral Range 8 – 14 μm (LWIR) 8 – 14 μm (LWIR) 8 – 14 μm (LWIR)
Infrared Resolution 384 × 288 640 × 480 1024 × 768 (HD)
Thermal Sensitivity / NETD ≤ 0.06°C (60 mK) @ 30°C ≤ 0.04°C (40 mK) @ 30°C ≤ 0.05°C (50 mK) @ 30°C
Standard Lens FOV 28° (IFOV: 1.30 mrad) 24° (IFOV: 0.66 mrad) 28° (IFOV: 0.48 mrad)
Optional Telephoto Lenses 12° (0.68 mrad) / 6° (0.34 mrad) 12° (0.33 mrad) / 6° (0.16 mrad) 14° (0.24 mrad) / 7° (0.12 mrad)
Optional Wide Angle Lens 48° (2.26 mrad) 48° (1.39 mrad) 50° (0.92 mrad)
Macro Optics Support Macro 1.25× & Macro 3× Macro 1.25× & Macro 3× Macro 1.25× & Macro 3×
Focus Mechanism Manual, Electric, Auto-Focus Manual, Electric, Auto-Focus Manual, Electric, Auto-Focus
Focus Distance Range 0.5m to ∞ (Macro: 30–200mm) 0.5m to ∞ (Macro: 30–200mm) 0.5m to ∞ (Macro: 30–200mm)
Standard Temperature Range -40°C to +150°C / 0°C to +410°C -40°C to +150°C / 0°C to +410°C -40°C to +150°C / 0°C to +410°C
High Temperature Option +300°C to +2000°C +300°C to +2000°C +300°C to +2000°C
Measurement Accuracy ±2°C or ±2% of readings ±2°C or ±2% of readings ±2°C or ±2% of readings
Network / Data Output 100/1000M Ethernet (RJ45) 100/1000M Ethernet (RJ45) 100/1000M Ethernet (RJ45)
Data Stream Mode Total radiation temperature flow Total radiation temperature flow Total radiation temperature flow
Operating Power Consumption ≤ 5W (DC 12V) ≤ 7W (DC 12V) ≤ 8W (DC 12V)
Interface Options RS-485, Relay, Sync Trigger, SD RS-485, Relay, Sync Trigger, SD RS-485, Relay, Sync Trigger, SD
Enclosure & Mount 226.8 × 91 × 86.5 mm | UNC 1/4"-20 226.8 × 91 × 86.5 mm | UNC 1/4"-20 226.8 × 91 × 86.5 mm | UNC 1/4"-20
Operational Weight ≤ 1.0 kg ≤ 1.0 kg ≤ 1.0 kg
Optical Field Engineering Tool

Lens Optics, FOV & Spot Size (MFOV) Calculator

Select your FIR stationary camera model, choose an optical lens, and input the target inspection distance. This engineering simulator computes horizontal and vertical field of view (FOV), area coverage, single-pixel spatial resolution (IFOV), and the ASNT-mandated 3×3 pixel Measurement Field of View (MFOV) required for ±2°C quantitative radiometric accuracy.

meters

ASNT Spatial Resolution Principle: A thermal anomaly must completely cover at least 3 × 3 sensor pixels (the Measurement Field of View, or MFOV) to eliminate optical optical bleed and ensure temperature measurement meets the calibrated ±2°C accuracy specification.

Live Radiometric Optics Computation FIR 1024 • 28° Standard
Field of View Width
2.49 m
Field of View Height
1.87 m
Area Coverage
4.66 m²
Single-Pixel IFOV Spot
2.4 mm
Quantitative Measurement Spot (MFOV, 3×3 Pixels)
7.2 mm
Targets smaller than 7.2 mm at 5.0 m distance require a telephoto lens or closer mounting to avoid radiometric under-reporting.

GigE Video Motion Note: 30 Hz to 60 Hz full-bandwidth radiometric streaming guarantees blur-free monitoring of fast-moving parts on automated conveyors and high-speed robotic cells. Exporting cameras above 9 Hz outside the United States requires export compliance documentation.

Disclaimer: Although we endeavor to ensure 100% precision in our reference documentation and digital tools, we are unable to offer complete guarantees concerning information accuracy. This resource should be employed as a rapid reference aid exclusively. For mission-critical implementations, please verify technical specifications with substrate producers or perform independent validation testing to confirm appropriateness for your particular use case.